Scroll to top

Boiler Installation

What is a Boiler?

Before we explain how boiler installation works, let’s understand what it is and how it works. A boiler is a vessel where fluid gets heated. In simple terms, it is a huge tank that heats water. Boilers commonly produce steam, which carries a very high amount of energy. Depending on the fuel used to boil the water, this can be a very energy-efficient process. If you need hot water, most likely, this is where it comes from.

If you currently don’t know how to operate your boiler, it is time to learn about it and ask for professional help if needed. The good news is that many companies offer boiler installation services, which include such tasks as wiring and programming and diagnostics and inspection.

Unfortunately, broken boilers are very common in older buildings and houses. The heat they produce is generally used to heat water and transfer it through your house for heating and hot water purposes. As these boilers grow old or receive inadequate maintenance, they can crack or break down in various ways. The most obvious signs that something might be wrong with your boiler is if you stop getting hot water or unusual sounds such as gurgling coming from the boiler cupboard under the stairs (but please note that this is not 100% foolproof). If you notice any of these things, then it would.

Different Types of Boilers

Believe it or not, there is not only one type of boiler. There are a few! Here are the different types of boilers we service here at Fresh Air & Heat. 

Fire-Tube Boilers

Fire-tube boilers are most efficient when they have water flowing across a large surface area to cool down. This makes them more expensive to construct as the tubes must be long enough for this large surface area to work effectively.

Water-Tube Boilers

The other type is a water-tube boiler – these use a different design which means that their smokestacks are shorter and don’t need as much space near the furnace, making them cheaper and easier to build. Water is heated up inside the short smokestack by pressurized gases from burning fuel in an airtight compartment at one end of it – this heats the water inside.

Industrial Boilers

Industrial boilers can get huge, but there are also tiny ones that exist. The most common industrial boilers are used for heating and supplying hot water to multiple areas in a building. A large structure with many floors might need more than one of these boilers to provide each floor with its hot water and heating source. This is where density comes into play: if you have fewer floors, it will be easier to heat them individually since the amount of metal needed per boiler is less.

Boiler Installation

Now that we understand what a boiler is and how it works. We can begin by explaining the installation process. When it comes to heating your home, a boiler is very energy efficient in doing so. If you have ever wondered how the boiler installation process goes, here is a simple version.The process of installing the boiler has many steps. To start, you need to ensure that where you are placing your boiler is suitable for it. The boiler should always be in a space where there is plenty of room for airflow. If you are not aware, boilers operate with hot water, and the heat from those boiling molecules needs an area to escape. In addition to sufficient room, you need to have a good foundation for the boiler and access to electricity if that is how it will be powered. Once everything is set up correctly, then comes adding the pipes. This task requires a lot of carefulness on the part of the installation company. Due to gas being involved in some homes at this point.

The Installation Process

The installation begins by determining the location of your new boiler. The boiler must be near the water lines, gas lines, electrical outlet, and flue for ventilation. Please make sure the ground and floor are level with each other where you decide to place it. Dressing the boiler is the next step. A boiler needs the appropriate pipes added to the system during this step. Add the circular pump to the boiler unit, then add the riser. After attaching the riser, you can now attach the pipes to different parts of your home. 

Next up, install the feed and return pipes. You will tighten the nuts and attach the boiler to a hot water tank with a copper pipe and proper fittings. A boiler must have proper ventilation, as this is where you will attach and manage the flue installation. Drill a few holes and attach the flue to the boiler. Now, we can assemble the gas line onto the boiler. It will not operate without a gas line. The final step is to turn it on! Make sure every connection is adequately secured, and it’s time to start it up.

Why Boiler Installation Matters

A working boiler is essential to everyday living. We use it for cooking, hot showers, laundry, and other necessities to keep up with our daily routine. Here at Fresh Air and Heat, we promise your boiler installation goes swiftly. Our team of experts will provide a boiler that fits perfectly with your home. Not only that, but we ensure that your day-to-day routine doesn’t get interrupted. Fresh Air and Heat offers a variety of boilers to fit your everyday needs. Our boiler installation technicians can install the boiler that is right for you. We highly recommend getting a professional for this job. Many safety issues could arise, and the CO2 output could vary if you do it yourself. 

Boiler Installation in Melbourne, FL

Call one of our experts here at Fresh Air and Heat to learn more about our boiler installation services! Contact us at 321-474-6314 or fill out our online contact form. We look forward to working with you.